Ps4 Remote Play App Mac

Update information

Ps4 Remote Play App Mac

Main features of the (PS4 Remote Play) version 3.0 update:

Stability during use of some features has been improved.

Getting ready

Switching over to Mac, download the Remote Play app from Sony's website and run the package installer. Open the app and click 'Start.' The Mac app discovers and wakes PS4 in seconds over Wi-Fi.

You'll need the following to use (PS4 Remote Play).

Computer^*
PS4™ system^*
DUALSHOCK™4 wireless controller
USB cable or DUALSHOCK™4 USB wireless adaptor
By using a wireless adaptor, you can use the controller wirelessly.
Account for PlayStation™Network
High-speed Internet connection
For best performance, we recommend a high-speed connection with upload and download speeds of at least 15 Mbps.

*See also 'System requirements'.

To use voice chat, you'll need a microphone. You can use your computer's built-in microphone if you'd like.

Initial setup

Installing the application

1.Click one of the links below to download the installation file for (PS4 Remote Play).
Save the file to your desktop or other location.
2.Run the installation file.
An installation dialog box appears. Follow the on-screen instructions to install the application.
During the installation, you might see a request to download additional software that's needed to use (PS4 Remote Play). To download this software, follow the on-screen instructions.

Setting up your PS4™ system

Before using this application, you'll need to do the following on your PS4™ system.

Enable Remote Play. Select (Settings) > [Remote Play Connection Settings], and then select the checkbox for [Enable Remote Play].
Activate the system as your primary PS4™ system. Select (Settings) > [Account Management] > [Activate as Your Primary PS4] > [Activate].
To start Remote Play while your PS4™ system is in rest mode, select (Settings) > [Power Save Settings] > [Set Features Available in Rest Mode]. Then select the checkboxes for [Stay Connected to the Internet] and [Enable Turning On PS4 from Network].

Using Remote Play

1.Turn on your PS4™ system or put it into rest mode.
2.Connect a controller to your computer with a USB cable, or pair it using a DUALSHOCK™4 USB wireless adaptor.
3.Launch (PS4 Remote Play) on your computer, and then click [Start].
4.Sign in with your account for PlayStation™Network.

You'll need to pair your PS4™ system and computer manually if you haven't activated your PS4™ system as your primary system, or if this application can't find your PS4™ system. Connect your computer and PS4™ system over the same network, and then follow the on-screen instructions.
Some games do not support Remote Play.
Some or all video content might not be displayed on your device depending on the game or video service.
For details on audio input and output during Remote Play, visit the customer support website for your country or region.

When Remote Play is not available

Refer to the following information if Remote Play is not available, or if you experience stability issues.

Generally, a high-speed connection with upload and download speeds of at least 5 Mbps is required.
To view the estimated connection speed for your PS4™ system, select (Settings) > [Network] > [Test Internet Connection].
We recommend a wired Internet connection for both your PS4™ system and computer.
If you are using a Wi-Fi (wireless) connection, move your PS4™ system closer to the access point or router. Make sure there are no obstructions between them.
Other devices on your network might be using a large amount of bandwidth. Wait until they are idle before using Remote Play.
Select [Settings] > [Video Quality for Remote Play] on the (PS4 Remote Play) start screen. Configure these settings:
- For [Resolution], choose either [Standard (540p)] or [Low (360p)].
- For [Frame Rate], choose [Standard].

The connection speed varies depending on your network environment. For details, contact your Internet service provider.

System requirements

PS4™ system

System software version 7.00 or later

Following apps need root permission mac. The MAC address will be temporarily changed. Also, this method mostly works on devices with MediaTek processors. Else this might create a lot of authentication issues. However, once the device restarts the MAC address will automatically revert back to the original one.Important Note: During the whole process, it is necessary to keep the manufacturer’s name unchanged, which means while changing the MAC address, which is XX:XX:XX the first six digits should not change, it must be the same as the original. So devices with processors from other brands have a low chance of success and may require to root their device.

Always update your PS4™ system to the latest version of the system software.

Windows PC

A computer with either of the following operating systems.
- Windows 8.1 (32-bit or 64-bit)
- Windows 10 (32-bit or 64-bit)
Intel® Core™ i5-560M Processor 2.67 GHz or faster
Intel Core i5-2450M Processor 2.50 GHz or faster
When setting [Video Quality for Remote Play] > [Resolution] to [Best (1080p)] and [Frame Rate] to [High] on a PS4™ system (CUH-7000 series).
100 MB or more of available storage
2 GB or more of RAM
1024 × 768 or higher display resolution
Sound card
USB port

Uninstalling the application

Folder and command names might vary depending on your OS version.

In Windows Settings, click [Apps], or in Control Panel, click [Programs] > [Programs and Features], and then uninstall [PS4 Remote Play].

Support information

For more information about (PS4 Remote Play), visit the customer support website for your country or region.